Coltuk.org

HELP ! Im in need of a 1.3 1998 colt engine or an oil pump.

Thanks Karl

i have a 1.3 engine, i will check the pump and get back to you

only other engines i have are 1.6 conversion kits

thanks m8 that be g8 as i nead the bottom timing cog 2 as it as worn in 2 oil pump

np il get it off and get pics for you, that way you can see what parts you want etc

il get it done for you tomorrow and contact you in the evening

thanks m8 how much u be looking for it about

wont be much much mate no more than £20 for the unit, hell of a lot cheaper than buying a new pump in the hundreds from mitsubishi

thanks m8 my father got 1 for me today from scrap yard so going 2 try that will let u now how we get on thanks very much for fast reply karl

no problem mate hope it all works out ok for you

how come you needing a new pump anyway have you had running problems with it or have you lost oil pressure etc

hi m8 the bottom timing cog has worn in to it causing in to leak the cog has worn 2 i still nead 2 get that cog as the 1 my ffather got of was so tight that he damage it so not there yet

have you got a picture of the part you still need as im unsure off the top of my head

hi yer this is the part thanks m8

try again lol

ah right i get ya now thats the bottom pulley timing belt cog, and yes i will have that in stock also

yer g8 m8 how much with the postage then and hows best 2 pay u thanks karl

a tenner all in should cover it mate but il double check for you

ok g8 let us know m8 and hows best 2 pay u thanks karl

new timing pulleys are not usually too expensive about £30-£40 from Mitsubishi maybe worth checking as something like that id want new unless it was impossible to get hold of. Id also put in a new keyway (woodruff key) about £1.50 from Mitsubishi also half moon shape

hi m8 no woodruff key taped crank end but will see tomorrow how much thay wont for 1 thanks

ahh thats good then wasnt 100% but check with mitsi shouldn't be dear to buy

using second hand is not a problem as long as there is no wear on the pulley or the shaft, no need to buy new from mitsubishi thats just throwing money away thats not needed

if it wasnt good enough to put up for sale i wouldnt sell it